ABS
Your current location: Home >> News >> 行业新闻

news

CONTACT US

  • HOT LINE:

    HOT LINE:

    +86 750 3777088
  • E-mail:

    E-mail:

    marketing@
    3dElements.hk
  • Address:

    Address:

    Yunqin Road,
    Land #25, Nationally
    High-tech
    . Development
    District
    , Jiangmen,
    Guangdong, China

微信图片_20181113141738.png

Wechat

Nylon use

Date of release:2016-07-27 Author: Click:


Polyamide is mainly used in synthetic fibers. Its most outstanding advantage is that it has higher wear resistance than all other fibers. It is 10 times more wear resistant than cotton and 20 times higher than wool. Some polyamide fibers are added to the blended fabric. It greatly improves its wear resistance; when stretched to 3-6%, the elastic recovery rate can reach 100%; it can withstand tens of thousands of times without breaking.


Nylon.jpg


The strength of the polyamide fiber is 1-2 times higher than that of cotton and 4-5 times higher than that of wool, which is 3 times that of viscose. However, the heat resistance and light resistance of the polyamide fiber are poor, and the retainability is not good, and the finished clothes are not as crisp as polyester. In addition, the nylon-66 and nylon-6 used for clothing have the disadvantages of poor hygroscopicity and poor dyeability. For this reason, a new type of polyamide fiber, nylon-3 and nylon-4, has been developed. It is considered to be promising because of its light weight, excellent wrinkle resistance, good air permeability, and good durability, dyeability and heat setting.


This kind of product is widely used, it is a good material for plastic, steel, iron, copper and other metals. It is an important engineering plastic; cast nylon widely replaces the wear parts of mechanical equipment, instead of copper and alloy as wear-resistant parts of equipment. . Suitable for making wear parts, transmission structural parts, household appliance parts, automobile manufacturing parts, screw rods to prevent mechanical parts, chemical machinery parts, chemical equipment. Such as turbines, gears, bearings, impellers, cranks, instrument panels, drive shafts, valves, blades, screw rods, high pressure washers, screws, nuts, seals, shuttles, sleeves, bushing connectors, etc.


The address of this article:http://www.3delements.hk/news/227.html

Key word:Nylonfactory,Nylonsales,Nylonprices

The last one:None
The next one:Main characteristics of ABS plastic

Recently browse:

  • HONGKONG
  • GUANGDONG