PLA
Your current location: Home >> FAQ >> Printing Guidance

FAQ

CONTACT US

  • HOT LINE:

    HOT LINE:

    +86 750 3777088
  • E-mail:

    E-mail:

    marketing@
    3dElements.hk
  • Address:

    Address:

    Yunqin Road,
    Land #25, Nationally
    High-tech
    . Development
    District
    , Jiangmen,
    Guangdong, China

微信图片_20181113141738.png

Wechat

1、Printing guidance for Low-Temperature Nylon

The nylon used in our 3D printing consumables has lower water absorption, better wear resistance and lower printing temperature than commercially available nylon. However, due to improper operation, it may cause uneven print quality. Therefore, we have specially provided some techniques for printing with low temperature nylon, which will effectively improve your printing results and help to print better products.


4.jpg


2、Printing guidance for ABS&PLA

Each different kind of plastic can come in different grades.  Different grades may have different properties like melt temperature, flexibility, viscosity when melted, stickiness when melted, etc.  These can all affect both your ability to print with them and the quality of your prints or the difficulty of calibration.

Elements has adopted 4043D as the standard PLA grade and PA-747 as the standard ABS grade.  These grades are generally going to be the best for new users. Please make sure to buy from a supplier that specifies the grade they sell, it will be your excellent choice!.

We also provide ABS/PLA printing instruction and precautions for your assistance.


3.jpg


The above is a little experience sharing of 3D ELEMENTS printing filaments. If you have better suggestions and methods, please contact us at any time.


  • HONGKONG
  • GUANGDONG